All metal mount, 18/8 stainless steel wire mesh resilient cushion
fixed under the foot.
Locating foot in cast iron, paint protection.
Suffix “H” with house and levelling screw.
Mount with a natural frequency of 25-35 Hz within a wide load
range. Progressive spring rate.
Designed to absorb high static and dynamic forces for machines
without base fitting.
For compression loads only.
Maximum excitation amplitude: ± 0,3 mm.
Dynamic overloading: 5 g.
Amplification at resonance (Q): < 4.
Temperature range: -90°C to +300°C.
Vibration isolation of smaller disturbing machine tools or when a
very stable support is required: turning machines, millers, grinders,
drilling machines etc.
Raise the machine.
Place the mounts under the machine and fasten the bolts.
Lower the machine until it rests on the mounts.
Level the machine and lock the nuts.
For machines that generates very large dynamic forces such as
power presses, punching machines etc., or where a high attenuation
is required, use machine mount V43W – V46W or V43HW – V46HW.