A highly efficient damping compound for structure borne noise in metal, plastic, wood etc.
Noisekiller Black is a unique highly efficient damping compound developed for acoustic improvement of decks and bulkheads, vehicle chassis and other structures that are exposed to vibrations.
NoiseKiller™ Black is a waterbased non-toxic
damping compound suitable for exterior use and as
a replacement of undercoating. NoiseKiller™ Black
has good adhesion to most materials including
sheet metal, plastics, fiberglass etc. The final
product is totally water proof after curing and
provides a wear resistant skin.
NoiseKiller™ Black is especially suitable for
sounddamping e.g. cars, boats, trains, industry etc.
Application of the Product:
The surface must be free from grease and dirt.
Noisekiller™ Black can be applied by brush, roller
or spray. For maximum effect, apply 3 layers, or 1-
1,5 mm thickness. 1 litre Noisekiller™ Black makes
1 m2 with 1 mm thickness.
The drying time is approximately 1-6 hours,
depending on the temperature.
Noisekiller™ Black must be stored frost free!
With skin contact, use water and soap to remove
the Noisekiller™ Black with eye contact, wash your
eyes with clean water for 10 – 15 minutes!
Odour: Odourless when dried
Density 1500 kg/m3
Viscosity: 400+ 100 mPas
Flash point: Over 100°C
Installation temperature: +2 – +80° C
Film thickness: 0,5-2,0 mm
Shelf Life: At least 1 year when
the container is not opened.